RESUME Dr. Güralp Özkoç was born in 1979 in Sinop, Turkey. He received his B.Sc. degree from Gazi University and his M.Sc. and Ph.D. (2007) degrees from the Polymer Science and Technology Department of Middle East Technical University (ODTU) in Ankara, Turkey. During his PhD study he conducted a research as an intern-PhD at DSM in 2005 in The Netherlands. His PhD thesis was on the ‘processing and characterization of short glass fiber and nanoclay reinforced ABS/PA6 blends’. He also focused on the disoersion characteristics of nanoclays and polymer phases of ABS and PA6 with respect to microco...
RESUME Dr. Güralp Özkoç was born in 1979 in Sinop, Turkey. He received his B.Sc. degree from Gazi University and his M.Sc. and Ph.D. (2007) degrees from the Polymer Science and Technology Department of Middle East Technical University (ODTU) in Ankara, Turkey. During his PhD study he conducted a research as an intern-PhD at DSM in 2005 in The Netherlands. His PhD thesis was on the ‘processing and characterization of short glass fiber and nanoclay reinforced ABS/PA6 blends’. He also focused on the disoersion characteristics of nanoclays and polymer phases of ABS and PA6 with respect to microcompounding conditions. After his PhD graduation, he started as an Assistant Professor at Kocaeli University (KOU), Department of Chemical Engineering in 2007. He founded the Plastics and Rubber Technology Research Group in 2008 at KOU, where currently 50+ MSc and PhD students are actively conducting research. He supervised more than 35 M.Sc. and 15 Ph.D. theses in the last 10 years. Furthermore, he chaired the Polymer Science and Technology Graduate Program for 7 years from 2011 to 2018, and took role as the Vice Director at Natural and Applied Science Institute of KOU for 4 years. In 2013, Dr. Ozkoc decided to initiate an R&D company with his colleague to transfer the low TRL research into applied research. This attempt resulted in very fruitful collaborations with national and multinational companies. In 2019, he has been promoted to a full-professorship position in Kocaeli University. In September 2020, he moved to The Netherlands to conduct research on additive manufacturing of polymer composites at for TNO-Brightlands Material Center as a senior researcher. In 2021, Dr. Ozkoc started as a full professor at Istinye Univetsity Department of Chemistry. He holds 6 patents, and he is the author of many international scientific papers and proceedings. His h-index is currently 27. Dr. Güralp Özkoç’s research interests are polymer compounding, polymer blending, composites and nanocomposites, elastomeric/rubber compounds, biodegradable and biomedical materials.
Articles
Effect of Octavinyl-Polyhedral Oligomeric Silsesquioxane on the Cross-linking, Cure Kinetics, and Adhesion Properties of Natural Rubber/Textile Cord Composites
, 2020
Mechanical, thermal and morphological properties of poly(lactic acid) by using star-shaped poly(ε-caprolactone) with POSS core
, 2019
Preparation and characterization of poly(lactic acid)-based contact-active antimicrobial surfaces
, 2023
Reactive compatibilization of biodegradable PLA/TPU blends via hybrid nanoparticle
, 2021
The outstanding interfacial adhesion between acrylo-POSS/natural rubber composites and polyamide-based cords: ‘An environmentally friendly alternative to resorcinol-formaldehyde latex coating’
, 2021
Investigation of shape memory behavior and physical properties of crosslinked low density polyethylene/OvPOSS/TAIC composites
, 2020
Effects of OV-POSS Nanoparticles on The Vulcanization Kinetics of Natural Rubber Compounds
, 2021
Lab-Scale Twin-Screw Micro-Compounders as a New Rubber-Mixing Tool: \u2018A Comparison on EPDM/Carbon Black and EPDM/Silica Composites\u2019
, 2021
EKMEK ATIKLARINDAN TERMOPLASTİK NİŞASTA ELDESİ VE DÜŞÜK YOĞUNLUKLU POLİETİLEN İLE HARMANLARININ ÖZELLİKLERİNİN İNCELENMESİ
, 2021
Cross-linked LLDPE composites in the presence of POSS nanoparticles and poly(ethylene glycol) dimethacrylate coagent: “Comparison of physical properties and shape memory behaviour”
, 2020
Crosslinked Low-Density Polyethylene/Polyhedral Oligomeric Silsesquioxanes Composites: Effects of Crosslinker Concentration on the Mechanical, Thermal, Rheological, and Shape Memory Properties
, 2021
A review on polyhedral oligomeric silsesquioxanes as a new multipurpose nanohybrid additive for poly(lactic acid) and poly(lactic acid) hybrid composites
, 2022
A novel practical approach for monitoring the crosslink density of an ethylene propylene diene monomer compound: Complementary scanning acoustic microscopy and FIB-SEM-EDS analyses
, 2022
A new approach for the reuse of scrap carbon fiber in high-added value continuous fiber reinforced composite structures
, 2022
Improving bonding strength of injection Overmolded composites
, 2022
Unlocking the Potential Use of Reactive POSS as a Coagent for EPDM/PP-Based TPV
, 2023
Novel and eco-friendly hydrophobic treatment of cotton and polyester fabrics based-on octavinyl and aminopropylisobutyl polyhedral oligomeric silsesquioxanes (OL-POSS and AM-POSS)
, 2023
Reactive compatibilization of PLA/PBS bio‐blends via a new generation of hybrid nanoparticles
, 2023
Miscibility and phase behavior of reactively compatibilized poly(lactic acid)/poly(butylene succinate) bio‐blends using various rheological analyses
, 2023
Shape memory behavior and physical properties of peroxide X-linked LLDPE-C6/POSS and LLDPE-C8/POSS composites
, 2023
Solid particle erosion and scratch behavior of novel scrap carbon fiber/glass fabric/polyamide 6.6 hybrid composites
, 2023
A comprehensive review of the recent developments in thermoplastics and rubber blends‐based composites and nanocomposites
, 2023
Improved Heat Dissipation of NR/SBR-Based Tire Tread Compounds via Hybrid Fillers of Multi-Walled Carbon Nanotube and Carbon Black
, 2023
Effects of Hybrid POSS Nanoparticles on the Properties of Thermoplastic Elastomer-Toughened Polyamide 6
, 2023
Processing and Characterization of UV Irradiated HDPE/POSS Fibers
, 2023
Preparation, characterization, and in vitro evaluation of chickenfeather fiber–thermoplastic polyurethane composites
, 2017
POSS nanoparticles as a potential compatibilizer for natural rubber/butadiene rubber blends
, 2020
Improved interfacial adhesion with the help of functional polyhedral oligomeric silsesquioxanes in silicone rubber/rayon fiber composites: Physical, mechanical, thermal, and morphological properties
, 2020
Effects of Diisocyanate and Polymeric Epoxidized Chain Extenders on the Properties of Recycled Poly(Lactic Acid)
, 2017
Polyimide nanocomposites in ternary structure: “A novel simultaneous neutron and gamma‐ray shielding material”
, 2020
A comprehensive study on shape memory behavior of PEG plasticized PLA/TPU bio-blends
, 2020
Additive manufacturing and biomechanical validation of a patient‐specific diabetic insole
, 2020
The Effects of Thermomechanical Cycles on the Properties of PLA TPS Blends
, 2014
Polypropylene/Spray Dried and Silane-Treated NanofibrillatedCellulose Composites
, 2020
Investigation of Shape Memory Behavior and Physical Properties of Crosslinked Low Density Polyethylene/OvPOSS/TAIC Composites
, 2020
Cross-linked LLDPE Composites in the Presence of POSS Nanoparticles and Poly(ethylene glycol) dimethacrylate Coagent: ”Comparison of Physical Properties and Shape Memory Behaviour”
, 2020
Overmolded polylactide/jute-mat eco-composites: A new method toenhance the properties of natural fiber biodegradable composites
, 2020
The Potential Use of Epoxy‐POSS as a Reactive Hybrid Compatibilizers for PLA/PBAT Blends: “Effect of PBAT Molecular Weight and POSS Type”
, 2020
The Potential Use of Epoxy‐POSS as a Reactive Hybrid Compatibilizers for PLA/PBAT Blends: “Effect of PBAT Molecular Weight and POSS Type”
, 2019
Overmolded hybrid composites of polyamide-6 on continuous carbon and glass fiber/epoxy composites: ’xxAn assessment of the interface’xx
, 2020
Effects of hot melt adhesives on the interfacial properties of overmolded hybrid structures of polyamide-6 on continuous carbon fiber/epoxy composites
, 2020
Non-Isothermal Crystallization Kinetics of Green Microalgae Filled Poly(Lactic Acid)
, 2019
High-Performance Green Composites of Poly(lactic acid) and Waste Cellulose Fibers Prepared by High-Shear Thermokinetic Mixing
, 2017
Effects of a diisocyanate compatibilizer on the properties of citric acid modified thermoplastic starch poly lactic acid blends
, 2013
Effects of a diisocyanate compatibilizer on the properties of citric acid modified thermoplastic starch/poly(lactic acid) blends
, 2013
Non-isothermal crystallization kinetics of PEG plasticized PLA/G-POSS nanocomposites
, 2017
Non isothermal crystallization kinetics of PEG plasticized PLA G POSS nanocomposites
, 2016
Reactive compatibilization of PLA TPU blends with a diisocyanate
, 2014
Thermally induced shape memory behavior, enzymatic degradation and biocompatibility of PLA/TPU blends: “Effects of compatibilization”
, 2017
High-Performance Green Composites of Poly(lactic acid) and Waste Cellulose Fibers Prepared by High-Shear Thermokinetic Mixing
, 2017
Thermal, mechanical and physical properties of chain extended recycled polyamide 6 via reactive extrusion: Effect of chain extender types
, 2019
Non-isothermal crystallization kinetics of Poly(Butylene succinate) (PBS) nanocomposites with different modified carbon nanotubes
, 2018
Mechanical, thermal and morphological properties of poly(lactic acid) by using star-shaped poly(ε-caprolactone) with POSS core
, 2019
Long- and short-term stability of plasticized poly(lactic acid): effects of plasticizers type on thermal, mechanical and morphological properties
, 2018
Preparation, characterization, and in vitro evaluation of chicken feather fiber–thermoplastic polyurethane composites
, 2017
Effects of POSS particles on the mechanical, thermal, and morphological properties of PLA and Plasticised PLA
, 2011
Processing and characterization of multilayer films of poly(ethylene terephthalate) and surface-modified poly(tetrafluoroethylene)
, 2007
A modified method for processing and characterization of organoclay based poly ethylene terephthalate nanocomposite fibers
, 2013
The mechanical, thermal and morphological properties of γ-irradiated PLA/TAIC and PLA/OvPOSS
, 2018
Compatibilization of PLA/PBAT blends by using Epoxy-POSS
, 2019
Long- and short-term stability of plasticized poly(lactic acid): effects of plasticizers type on thermal, mechanical and morphological properties
, 2019
Synthesis and Characterization of Novel Copolymers of Poly (isopentenyl PEG - co-allyl PEG), Their Performance in Cement Mortar and Comparison with Physical Blends
, 2018
Effects of Magnesia Incorporation on Properties of Polystyrene/Magnesia Composites
, 2018
Physical, mechanical and neutron shielding properties of h-BN/Gd2O 3/HDPE ternary nanocomposites
, 2018
The effects of POSS particles on the flame retardancy of intumescent polypropylene composites and the structure-property relationship
, 2018
Synthesis of phosphorus- and phenyl-based ROMP polymers and investigation of their effects on the thermomechanical and flammability properties of a polypropylene-IFR system
, 2018
Mechanical and thermal properties of volcanic particle filled PLA/PBAT composites
, 2018
Non-isothermal crystallization kinetics and dynamic mechanical properties of poly(Butylene succinate) nanocomposites with different type of carbonaceous nanoparticles
, 2018
Investigation of relationship between crystallization kinetics and interfacial interactions in plasticized poly(lactic acid)/POSS nanocomposites: “Effects of different POSS types”
, 2018
Investigation of relationship between crystallization kinetics and interfacial interactions in plasticized poly(lactic acid)/POSS nanocomposites: “Effects of different POSS types”
, 2018
The mechanical, thermal and morphological properties of γ-irradiated PLA/TAIC and PLA/OvPOSS
, 2018
Reactive compatibilization of PLA/TPU blends with a diisocyanate
, 2014
Use of Halloysite Nanotubes for the Production of Poly (lactic acid) Nanocomposites
, 2013
A modified method for processing and characterization of organoclay-based poly(ethylene terephthalate) nanocomposite fibers
, 2013
Properties of modified ethylene terpolymer/poly(lactic acid) blends based films
, 2013
Interfacial strength in short glass fiber reinforced acrylonitrile-butadiene-styrene/polyamide 6 blends
, 2009
Production of poly(lactic acid)/organoclay nanocomposite scaffolds by microcompounding and polymer/particle leaching
, 2009
Processing and Characterization of Short Glass Fiber/ABS/Polyamide-6 Composites
, 2004
Synthesis of phosphorus- and phenyl-based ROMP polymers and investigation of their effects on the thermomechanical and flammability properties of a polypropylene-IFR system
, 2018
Mechanical and thermal properties of volcanic particle filled PLA/PBAT composites
, 2018
Non-isothermal crystallization kinetics of PEG plasticized PLA/G-POSS nanocomposites
, 2017
Effects of Diisocyanate and Polymeric Epoxidized Chain Extenders on the Properties of Recycled Poly Lactic Acid
, 2017
Comparison of natural halloysite with synthetic carbon nanotubes in poly lactic acid based composites
, 2017
Nanoclay fibers for the reinforcement of poly lactic acid based composites
, 2016
Investigation of relationship between crystallization kinetics and interfacial interactions in plasticized poly lactic acid POSS nanocomposites Effects of different POSS types
, 2016
Non isothermal crystallization kinetics and dynamic mechanical properties of poly Butylene succinate nanocomposites with different type of carbonaceous nanoparticles
, 2016
The influence of POSS type on the properties of PLA
, 2016
Effects of octamaleamic acid POSS used as the adhesion enhancer on the properties of silicone rubber silica nanocomposites
, 2016
Effects of halloysite nanotubes on the performance of plasticized poly lactic acid based composites
, 2016
Properties of talc wollastonite polyamide 6 hybrid composites
, 2015
Mechanical and Morphological Properties of Buckminster Fullerene C60 Added Glass Fiber Reinforced Polyamide 66 Multiscale Composites
, 2015
Effect of Fiber Content on Failure Modes of Glass Fiber Reinforced Injection Molded Polyamide 66 Composites
, 2015
Dual effect of chemical modification and polymer precoating of flax fibers on the properties of short flax fiber poly lactic acid composites
, 2015
A study on the separation performance of zeolite filled thin film composite poly dimethyl siloxane membrane
, 2015
Interfacial strength in short glass fiber reinforced acrylonitrile butadiene styrene polyamide 6 blends
, 2009
Thermally conductive boron nitride SEBS EVA ternary composites Processing and characterization
, 2009
Effects of olefin based compatibilizers on the morphology thermal and mechanical properties of ABS polyamide 6 blends
, 2007
Effects of microcompounding process parameters on the properties of ABS polyamide 6 blends based nanocomposites
, 2008
Impact essential work of fracture toughness of ABS polyamide 6 blends compatibilized with olefin based copolymers
, 2008
Microcompounding of organoclay ABS PA6 blend based nanocomposites
, 2008
Morphology biodegradability mechanical and thermal properties of nanocomposite films based on PLA and plasticized PLA
, 2009
Production of poly lactic acid organoclay nanocomposite scaffolds by microcompounding and polymer particle leaching
, 2009
Effects of Alkali Treatment on the Properties of Short Flax Fiber Poly Lactic Acid Eco Composites
, 2011
Effects of POSS particles on the mechanical thermal and morphological properties of PLA and Plasticised PLA
, 2011
Plasticized and unplasticized PLA organoclay nanocomposites Short and long term thermal properties morphology and nonisothermal crystallization behavior
, 2012
Investigation of erosive wear behavior and physical properties of SGF and or calcite reinforced ABS PA6 composites
, 2013
POSS reinforced PET based composite fibers Effect of POSS type and loading level
, 2013
Properties of modified ethylene terpolymer poly lactic acid blends based films
, 2013
Fracture toughness analysis of O POSS PLA composites assessed by essential work of fracture method
, 2014
Thoughening of poly lactic acid with silicone rubber
, 2014
Effects of reactive and nonreactive POSS types on the mechanical thermal and morphological properties of plasticized poly lactic acid
, 2014
Properties of thermally conductive micro and nano size boron nitride reinforced silicon rubber composites
, 2010
Short glass fiber reinforced ABS and ABS PA6 composites Processing and characterization
, 2005
Effects of polyamide 6 incorporation to the short glass fiber reinforced ABS composites an interfacial approach
, 2004
Reports
Effect of co-plasticizer type on properties of edible starch films - ÖZKOÇ SEMİN ÖZGE,Sungur Seval,Kaval Melike,ÖZKOÇ GÜRALP
STUDY ON MECHANICAL/THERMAL PROPERTIES AND FRACTURE BEHAVIOR OF PLA TOUGHENED WITH PBAT AND POSS - YILMAZ SİNAN,KODAL MEHMET,TÜCCAR KILIÇ Nilay,ÖZKOÇ GÜRALP
Essential work of fracture toughness analysis of poly(lactic acid) thermoplastic starch blends - YILMAZ SİNAN,KODAL MEHMET,ÖZKOÇ GÜRALP
Investigation of effects of MoEpPOSS nanoparticle on the morphological and rheological properties - YILDIRIM RUMEYSA, KOÇOĞLU HÜROL, ÜN MERVE, SAEED ULLAH MUHAMMAD, YAKAR İPEK, ÖZKOÇ GÜRALP, MERT OLCAY, KODAL MEHMET
Investigation of the non-isothermal crystallization kinetics of thermoplastic elastomer toughened polyamide 6 blends - YAKAR İPEK, YILDIRIM RUMEYSA, ÖZKOÇ GÜRALP, MERT OLCAY, KODAL MEHMET
Yeni Nesil Nanoparçacıklar ile Uyumlaştırılmış PA6/TPE Harmanlarının Tekrarlı Ekstrüzyon Sonrası Mekanik, Reolojik ve Morfolojik Özelliklerinin İncelenmesi - YILDIRIM RUMEYSA, ÖZKOÇ GÜRALP, MERT OLCAY, KODAL MEHMET
Değişken Süper Emici Polimer Konsantrasyonu ile Poliolefin Temelli Karışımların İşlenebilirliğinin İncelenmesi - URTEKİN GİZEM, AYDIN KİNYAS, KODAL MEHMET, ÖZKOÇ GÜRALP
Süper Emici Polimer ile Hazırlanmış Şişebilen Poliolefin Karışımlarının Özelliklerinin İncelenmesi - URTEKİN GİZEM, AYDIN KİNYAS, KODAL MEHMET, ÖZKOÇ GÜRALP
Rheological and thermal properties of PP/EPDM based thermoplastic vulcanizates: “M-POSS as an alternative coagent” - ÖZKOÇ GÜRALP, YAZICI NAZLI, METİN MERVE, İNAN ÖZGENUR, KODAL MEHMET
Synthesis of collagen modified PLA biocomposites for tissue engineering applications - UZUNER AYŞEGÜL, SANCAKLI AYKUT, ARICAN FATİH, ÖZKOÇ GÜRALP, KODAL MEHMET
Investigation of electrical conductivity properties wood-based panels - KOÇOĞLU ÖZDEN BESTE, ÖZKOÇ GÜRALP, KODAL MEHMET, BENGÜ BAŞAK
Investigation of the effect of AcryloPOSS loading ratio on the properties of LLDPE fibers - KODAL MEHMET, BİÇER EZGİ, ÖZKOÇ GÜRALP
Investigation of Self-Healing Properties of Bromobutyl Rubber in the Presence of Novel Hybrid Nanoparticles - KODAL MEHMET, KAVACIK ÖZNUR, GÖKÇESULAR SEZGİN, MERT OLCAY, ÖZKOÇ GÜRALP
Reactive polyhedral oligomeric silsesquioxane as a compatibilizer for biopolymer blends - SAEED ULLAH MUHAMMAD, YILDIRIM RUMEYSA, KODAL MEHMET, ÖZKOÇ GÜRALP
A novel approach to improve the performance of TPV via self-nano reinforced network structure - YAZICI NAZLI, KODAL MEHMET, ÖZKOÇ GÜRALP
Development of self-healing butyl rubber formulations - KAVACIK ÖZNUR, GÖKÇESULAR SEZGİN, MERT OLCAY, ÖZKOÇ GÜRALP, KODAL MEHMET
Mühendislik Termoplastiği ile Harmanlanmış Poliester Temelli Termoplastik Elastomerlerin Esas Kırılma Davranışının İncelenmesi - GÜZEL DİLEK YAPRAK, PALAZ VİLDAN, YILDIRIM RUMEYSA, SAEED ULLAH MUHAMMAD, ÜN MERVE, DEMİR GÜLŞAH, KOÇOĞLU HÜROL, ÖZKOÇ GÜRALP, MERT OLCAY, KODAL MEHMET
Monoepoksi POSS ile Uyumlaştırılmış Poliamit 6/Termoplastik Elastomer Karışımlarının Isıl ve Reolojik Özelliklerinin İncelenmesi - YILDIRIM RUMEYSA, ÜN MERVE, SAEED ULLAH MUHAMMAD, KOÇOĞLU HÜROL, DEMİR GÜLŞAH, YAZICI NAZLI, ÖZKOÇ GÜRALP, MERT OLCAY, KODAL MEHMET
Rheological and Morphological Properties of Mono-Epoxide POSS Compatibilized PLA/PBS Blends - SAEED ULLAH MUHAMMAD, KODAL MEHMET, ÖZKOÇ GÜRALP
Oktaizobütil Polihedral Oligomerik Silseskuiokzan (O-POSS) ile Uyumlaştırılmış Poliamit 6 (PA6)/Termoplastik Elastomer (TPE) Karışımlarının Esas Kırılma İşinin İncelenmesi - PALAZ VİLDAN, GÜZEL DİLEK YAPRAK, YILDIRIM RUMEYSA, SAEED ULLAH MUHAMMAD, ÜN MERVE, DEMİR GÜLŞAH, KOÇOĞLU HÜROL, ÖZKOÇ GÜRALP, MERT OLCAY, KODAL MEHMET
Sürekli Fazı Termoplastik Elastomer (TPE) Olan Poliamit 6 (PA6)/TPE Karışımlarının Kristalizasyon Kinetiğine Yeni Nesil Nanotaneciklerin Etkisinin İncelenmesi - METE İLKAY, YILDIRIM RUMEYSA, SAEED ULLAH MUHAMMAD, ÜN MERVE, DEMİR GÜLŞAH, KOÇOĞLU HÜROL, ÖZKOÇ GÜRALP, MERT OLCAY, KODAL MEHMET
PTPE/PA6 Karışımlarının Yeni Nesil Hibrit Nanoparçacık Yoluyla Reaktif Uyumlulaştırılması ve Karakterizasyonu - UZUNER AYŞEGÜL, YILDIRIM RUMEYSA, YAZICI NAZLI, ÖZKOÇ GÜRALP, MERT OLCAY, KODAL MEHMET
Sürekli Fazı Termoplastik Elastomer (TPE) Olan Poliamit 6/TPE Karışımlarının Mekanik ve Morfolojik Özelliklerinin İncelenmesi - YILDIRIM RUMEYSA, SAEED ULLAH MUHAMMAD, KOÇOĞLU HÜROL, ÜN MERVE, YAZICI NAZLI, DEMİR GÜLŞAH, ÖZKOÇ GÜRALP, MERT OLCAY, KODAL MEHMET
Akrilo-POSS Nanotacikleri ile Takviye Edilmiş NR/SBR Kompozitlerinin Tekstil Elyaflara Yapışma Davranışının İncelenmesi - ŞENOL ÇAĞIL, YAZICI NAZLI, KAVACIK ÖZNUR, GÖKÇESULAR SEZGİN, ÖZKOÇ GÜRALP, KODAL MEHMET
Bromobütil Kauçuğun Kendi Kendini Yenileyebilme Davranışına Deneysel Parametrelerinin Etkisinin İncelenmesi - KAVACIK ÖZNUR, GÖKÇESULAR SEZGİN, ÖZKOÇ GÜRALP, KODAL MEHMET
Çözelti ve Yığın Polimerizasyonu ile Üretilen PLA’nın Fiziksel Özelliklerine Deneysel Parametrelerin Etkisinin İncelenmesi - UZUNER AYŞEGÜL, SANCAKLI AYKUT, ARICAN FATİH, ÖZKOÇ GÜRALP, KODAL MEHMET
Üzerine Enjeksiyon Yöntemi ile Üretilmiş Sürekli Cam Elyaf Takviyeli PP/Kısa Cam Elyaf Takviyeli PP Malzemelerin Yapışma Davranışlarının İncelenmesi - AKPINAR SERKAN, METİN MERVE, YILDIRIM RUMEYSA, SEZEN MELTEM, KODAL MEHMET, ÖZKOÇ GÜRALP
Süper Emici Polimer Konsantrasyonuna Bağlı Olarak Poliolefin Köpüklerin Özelliklerinin İncelenmesi - URTEKİN GİZEM, AYDIN KİNYAS, KODAL MEHMET, ÖZKOÇ GÜRALP
Etilen Glikol-Alg Yağı Esterleri ile Plastikleştirilmiş PLA’nın Mekanik, Isıl, Termo-Mekanik ve Morfolojik Özelliklerinin İncelenmesi - AYDOĞDU HİLAL, YAZICI NAZLI, YILDIRIM RUMEYSA, KUTLUK TOGAYHAN, KAPUCU NURCAN, ÖZKOÇ GÜRALP, KODAL MEHMET
Bitkisel Kökenli Yağların Doğal Kauçuk/Stiren Bütadien Kauçuk Harmanlarında Proses Kolaylaştırıcı Olarak Kullanılabilme Potansiyelinin İncelenmesi - YAZICI NAZLI, YILDIRIM RUMEYSA, SUDEMAN BURAK, KODAL MEHMET, ÖZKOÇ GÜRALP
Microcompounding of different rubber formulations - KODAL MEHMET, ÖZKOÇ GÜRALP
Preparation and characterization of CNT and CB reinforced tire tread compounds using MC15HT - YAZICI NAZLI, KODAL MEHMET, ÖZKOÇ GÜRALP
The effect of temperature and crystallization on the adhesion between overmolded PP based composites - AKPINAR SERKAN, METİN MERVE, SEZEN MELTEM, KODAL MEHMET, ÖZKOÇ GÜRALP
Effects of MWCNT on mechanical and thermal properties of POM/PBS blends - USLUEL CANSIN, YAZICI NAZLI, TUGAY YARICI, ÖZKOÇ GÜRALP, KODAL MEHMET
Investigation of mechanical, thermal, crystallographic and morphological properties of OvPOSS/polyethylene fibers - BİÇER EZGİ, KODAL MEHMET, ÖZKOÇ GÜRALP
Effect of acrylo-POSS nanoparticles on vulcanization kinetics of PP/EPDM based thermoplastic vulcanizate - DEMİR GÜLŞAH, YAZICI NAZLI, KODAL MEHMET, ÖZKOÇ GÜRALP
Mechanical and morphological properties of MoEp-POSS nanoparticle compatibilized PA6/TPE blends - YILDIRIM RUMEYSA, ÜN MERVE, YAZICI NAZLI, SAEED ULLAH MUHAMMAD, DEMİR GÜLŞAH, KOÇOĞLU HÜROL, ÖZKOÇ GÜRALP, MERT OLCAY, KODAL MEHMET
Mechanical and morphological properties of PP/EPDM based thermoplastic vulcanizates: “A-POSS as coagent” - YAZICI NAZLI, İNAN ÖZGENUR, METİN MERVE, KODAL MEHMET, ÖZKOÇ GÜRALP
The effects of acrylo-POSS nanoparticles on the adhesion properties of rayon cord and natural rubber skim compounds - YAZICI NAZLI, DURSUN SAMET, TUGAY YARICI, KILIÇ BURAK, KARAAĞAÇ BAĞDAGÜL, MERT OLCAY, ÖZKOÇ GÜRALP, KODAL MEHMET
A new route to dynamically vulcanizate PP/EPDM using chemically hybrid nanostructures - YAZICI NAZLI, KODAL MEHMET, ÖZKOÇ GÜRALP
Non-isothermal crystallization kinetics of PP/EPDM based thermoplastic vulcanizates: “OV-POSS as a nucleating agent” - YAZICI NAZLI, İNAN ÖZGENUR, METİN MERVE, KODAL MEHMET, ÖZKOÇ GÜRALP
Effect of methacryl-POSS nanoparticle on the vulcanization kinetics of PP/EPDM based thermoplastic vulcanizate - DEMİR GÜLŞAH, YAZICI NAZLI, KODAL MEHMET, ÖZKOÇ GÜRALP
Rheological and thermal properties of Tri-EpPOSS nanoparticle compatibilized PA6/TPE blends - YILDIRIM RUMEYSA, ÜN MERVE, YAZICI NAZLI, SAEED ULLAH MUHAMMAD, DEMİR GÜLŞAH, KOÇOĞLU HÜROL, ÖZKOÇ GÜRALP, MERT OLCAY, KODAL MEHMET
Effect of pre-heating time and mechanical interlocking on the bonding behavior of over-injection molded PP composites - AKPINAR SERKAN, METİN MERVE, KODAL MEHMET, SEZEN MELTEM, ÖZKOÇ GÜRALP, ALTAN M. CENGİZ
Thermal and mechanical properties of PLA/PBS Bioblends compatibilized with mono epoxide POSS - SAEED ULLAH MUHAMMAD, YAZICI NAZLI, KODAL MEHMET, ÖZKOÇ GÜRALP
Mechanical and Morphological Properties of TriEp-POSS nanoparticle compatibilized PA6/TPE Blends - ÜN MERVE, YILDIRIM RUMEYSA, YAZICI NAZLI, SAEED ULLAH MUHAMMAD, DEMİR GÜLŞAH, MERT OLCAY, ÖZKOÇ GÜRALP, KODAL MEHMET
OV-POSS as an alternative coagent for EPDM/PP based thermoplastic vulcanizate: “Comparison of mechanical and morphological properties” - YAZICI NAZLI, METİN MERVE, İNAN ÖZGENUR, KODAL MEHMET, ÖZKOÇ GÜRALP
A-POSS as an adhesion promoter for nylon 6.6 cord and natural rubber compound - YAZICI NAZLI, DURSUN SAMET, TUGAY YARICI, KILIÇ BURAK, MERT OLCAY, KARAAĞAÇ BAĞDAGÜL, KODAL MEHMET, ÖZKOÇ GÜRALP
Poli(Laktik Asit) (PLA) / Polioksimetilen (POM) Karışımlarının POM Yükleme Oranına Bağlı Olarak Mekanik, Isıl Ve Reolojik Özelliklerinin İncelenmesi - KARTAL YONCA, ÜN MERVE, YAZICI NAZLI, ÖZKOÇ GÜRALP, KODAL MEHMET
TAC ve OV-POSS’un PP/EPDM Karışımlarının Vulkanizasyon Kinetiği Üzerine Etkisi - DEMİR GÜLŞAH, YAZICI NAZLI, KODAL MEHMET, ÖZKOÇ GÜRALP
Rheological and thermal properties of PP/EPDM based thermoplastic vulcanizates: “OV-POSS as an alternative coagent - YAZICI NAZLI, METİN MERVE, İNAN ÖZGENUR, KODAL MEHMET, ÖZKOÇ GÜRALP
Multi- and Mono-epoxide POSS as a potent compatibilizer for PLA/PBS Bioblends - SAEED ULLAH MUHAMMAD, Alchekh Wis Abdoulmounem, KODAL MEHMET, ÖZKOÇ GÜRALP
Shape memory behavior and physical properties of peroxide x-linked LLDPE-C6/POSS and LLDPE-C8/POSS composites - BİÇER EZGİ, KURT DEMİR GÜLŞEN, KODAL MEHMET, ÖZKOÇ GÜRALP
Overmolding of SGF-PP onto a Continuous GF-PP Composite - AKPINAR SERKAN, METİN MERVE, KODAL MEHMET, SEZEN MELTEM, ALTAN M. CENGİZ, ÖZKOÇ GÜRALP
Improvement adhesion of Acrylo-POSS reinforced natural rubber skim compound towards aramid fiber - YAZICI NAZLI, DURSUN SAMET, TUGAY YARICI, MERT OLCAY, KARAAĞAÇ BAĞDAGÜL, KODAL MEHMET, ÖZKOÇ GÜRALP
Poliamit Temelli Vaksların Doymuş Poliester Reçinelerin Fiziksel Ve Kimyasal Özelliklerine Etkisinin İncelenmesi - VATANSEVER GÖZDE, YAZICI NAZLI, ÖZKOÇ GÜRALP, KODAL MEHMET
LDPE'nin Çapraz Bağlanma Verimliliği ve Fiziksel Özelliklerinin Araştırılması: “ OvPOSS ile Esnek ve Rijit Koajanların Karşılaştırılması” - BİÇER EZGİ, KURT DEMİR GÜLŞEN, KODAL MEHMET, ÖZKOÇ GÜRALP
POSS ve TAIC Varlığında Çapraz Bağlanmış LDPE Ve LDPE Kompozitlerinin Şekil Hafıza Davranışı ve Fiziksel Özelliklerinin İncelenmesi - KURT DEMİR GÜLŞEN, BİÇER EZGİ, KODAL MEHMET, ÖZKOÇ GÜRALP
Ekmek Atıklarından Termoplastik Nişasta Eldesi Ve Ldpe İle Harmanlarının Karakterizasyonu - YILDIRIM RUMEYSA, İNAN ÖZGENUR, KODAL MEHMET, ÖZKOÇ GÜRALP
Glycidyl Poss as a potential compatibilizer for PLA/PBS blends - SAEED ULLAH MUHAMMAD, Alchekh Wis Abdoulmounem, KODAL MEHMET, ÖZKOÇ GÜRALP
Poliamit 6/ Termoplastik Elastomer Karışımlarının Mekanik, Isıl, Reolojik Ve Morfolojik Özelliklerinin İncelenmesi - ÜN MERVE, SAEED ULLAH MUHAMMAD, SEZEMOĞLU BÜŞRA, YILDIRIM RUMEYSA, YAZICI NAZLI, ÖZKOÇ GÜRALP, MERT OLCAY, KODAL MEHMET
Kayma hızı ve kovan sıcaklığının EPDM/PP TPV’lerinin mekanik özellikleri üzerine etkisi - YAZICI NAZLI, İNAN ÖZGENUR, METİN MERVE, KODAL MEHMET, ÖZKOÇ GÜRALP
Essential work of fracture toughness analysis of poly(lactic acid) thermoplastic starch blends - YILMAZ SİNAN,KODAL MEHMET,ÖZKOÇ GÜRALP
Antimikrobiyal Polilaktik Asit Filmlerin Hazırlanması ve Termal/Mekanik Özelliklerinin İncelenmesi - AYNALI FİGEN,DOĞANCI ERDİNÇ,DORUK TUĞRUL,ÖZKOÇ GÜRALP,SADIKOĞLU HASAN
Antimikrobiyal Polilaktik Asit Filmlerin Hazırlanması Ve Termal/Mekanik Özelliklerinin İncelenmesi - AYNALI FİGEN,DOĞANCI ERDİNÇ,DORUK TUĞRUL,ÖZKOÇ GÜRALP,SADIKOĞLU HASAN
Enhanced flame retardancy of polylactide/jute overmolded composites - Wis Abdulounem Elcheck,ATABEK SAVAŞ LEMİYE,DOĞAN MEHMET,ÖZKOÇ GÜRALP
POSS-PCL Yıldız Polimerleri Kullanılarak PLA’ın Termal ve Mekanik Özelliklerinin Geliştirilmesi - DANDAN DOĞANCI MERVE,DORA DALDAL ELİF,DOĞANCI ERDİNÇ,ÖZKOÇ GÜRALP
POSS Merkezli Heterokollu Yıldız Şekilli PCL-PLA Polimerlerinin Sentezi Ve PLA İle Blendlerinin Hazırlanması - DANDAN DOĞANCI MERVE,YILDIRIM DERYA,DOĞANCI ERDİNÇ,ÖZKOÇ GÜRALP
Investigation of adhesion properties between M-POSS/NR compounds and rayon fiber - YAZICI NAZLI,DURSUN SAMET,YARICI TUGAY,KILIÇ BURAK,UZUNER AYŞEGÜL,KARAAĞAÇ BAĞDAGÜL,KODAL MEHMET,ÖZKOÇ GÜRALP
Investigation of the effect of the new generation hybrid nanoparticles on the compatibility of polymer blends - USLUEL CANSU,UZUNER AYŞEGÜL,YAZICI NAZLI,KODAL MEHMET,ÖZKOÇ GÜRALP
Investigation of Shape Memory Behavior and Physical Properties of Crosslinked Low Density Polyethylene/OvPOSS/TAIC Composites - BİÇER EZGİ,GÜLŞEN KURT DEMİR,KODAL MEHMET,ÖZKOÇ GÜRALP
Cross-linked LLDPE Composites in the Presence of POSS Nanoparticles and Poly(ethylene glycol) dimethacrylate Coagent:”Comparison of Physical Properties and Shape Memory Behaviour” - GÜLŞEN KURT DEMİR,BİÇER EZGİ,KODAL MEHMET,ÖZKOÇ GÜRALP
Investigation of shape memory behavior and physical properties of cross-linked low density polyethylene/OvPOSS/TAIC composites - BİÇER EZGİ,KURT DEMİR GÜLŞEN,KODAL MEHMET,ÖZKOÇ GÜRALP
Cross-linked LLDPE composites in the presence of POSS nanoparticles and poly(ethylene glycol) dimethacrylate coagent: “Comparison of physical properties and shape memory behaviour” - KURT DEMİR GÜLŞEN,BİÇER EZGİ,KODAL MEHMET,ÖZKOÇ GÜRALP
Mechanical, thermal, rheological and morphological properties of poly(lactic acid)/ butanol-algae oil esters - KODAL MEHMET,KUTLUK TOGAYHAN,KAPUCU NURCAN,ÖZKOÇ GÜRALP
Peroksit ile çapraz bağlanmış LLDPE/POSS kompozitlerinde termal, mekanik ve reolojik özellikler ile şekil hafıza davranışının incelenmesi - BİÇER EZGİ,KURT DEMİR GÜLŞEN,KODAL MEHMET,ÖZKOÇ GÜRALP
Peroksit ile çapraz bağlanmış LDPE/POSS: “Peroksit konsantrasyonu ve POSS türünün fiziksel ve şekil hafıza özelliklerine etkisi” - KURT DEMİR GÜLŞEN,BİÇER EZGİ,KODAL MEHMET,ÖZKOÇ GÜRALP
Farklı oranlarda TMPTMA ile çapraz bağlanmış LLDPE karışımlarının özelliklerinin incelenmesi - GÜLER FATMA,BİÇER EZGİ,KURT DEMİR GÜLŞEN,KODAL MEHMET,ÖZKOÇ GÜRALP
Properties of crosslinked LLDPE in the presence of TMPTMA or POSS nanoparticles: ”Comparison of physical properties and shape memory behaviour - KURT DEMİR GÜLŞEN,BİÇER EZGİ,KODAL MEHMET,ÖZKOÇ GÜRALP
Comparison of TAIC or OvPOSS on the crosslinking efficiency and shape memory properties of LDPE - BİÇER EZGİ,KURT DEMİR GÜLŞEN,KODAL MEHMET,ÖZKOÇ GÜRALP
Investigation of shape memory behavior and physical properties of cross-linked low density polyethylene/OvPOSS/TAIC composites - BİÇER EZGİ,KURT DEMİR GÜLŞEN,KODAL MEHMET,ÖZKOÇ GÜRALP
Cross-linked LLDPE composites in the presence of POSS nanoparticles and poly(ethylene glycol) dimethacrylate coagent: “Comparison of physical properties and shape memory behaviour” - KURT DEMİR GÜLŞEN,BİÇER EZGİ,KODAL MEHMET,ÖZKOÇ GÜRALP
Investigation of mechanical, thermal and rheological properties of crosslinked LDPE, LLDPE-C6 and LLDPE-C8 blends containing polybutadiene as a coagent - BAŞARAN ESRA,BİÇER EZGİ,KURT DEMİR GÜLŞEN,KODAL MEHMET,ÖZKOÇ GÜRALP
The investigation of the effect of TAIC loading level on the properties of LLDPE/PRX - GÜLER FATMA,BİÇER EZGİ,KURT DEMİR GÜLŞEN,KODAL MEHMET,ÖZKOÇ GÜRALP
Etilen glikol dimetakrilat ile hazırlanan çapraz bağlanmış polietilenin mekanik, ısıl ve reolojik özelliklerinin incelenmesi - BAŞARAN ESRA,BİÇER EZGİ,KURT DEMİR GÜLŞEN,KODAL MEHMET,ÖZKOÇ GÜRALP
Shape memory properties and characterization of crosslinked polyethylene/Oib-POSS composites - KODAL MEHMET,BİÇER EZGİ,KURT DEMİR GÜLŞEN,ÖZKOÇ GÜRALP
Çapraz bağlanmış LDPE/POSS nanokompozitlerinin fiziksel ve şekil hafıza özelliklerinin incelenmesi - KURT DEMİR GÜLŞEN,BİÇER EZGİ,KODAL MEHMET,ÖZKOÇ GÜRALP
Peroksit ile çapraz bağlanmış polietilen: ”peroksit konsantrasyonunun fiziksel ve reolojik özellikler üzerindeki etkisi - BİÇER EZGİ,KURT DEMİR GÜLŞEN,KODAL MEHMET,ÖZKOÇ GÜRALP
The effects of different POSS types on the properties of NR/BR elastomer blends - ERCAN KALKAN MERVE,Karakaya Nursel,ÖZKOÇ GÜRALP
PBS/POM karışımlarının izotermal olmayan kristalizasyon kinetiğine MWCNT’nin etkisinin incelenmesi - USLUEL CANSU,YARICI TUGAY,ÖZKOÇ GÜRALP,KODAL MEHMET
Effects of OV-POSS Nanoparticles on the Vulcanization Kinetics of Natural Rubber Compounds - ÜÇTEPE EBRU,KARAAĞAÇ BAĞDAGÜL,KODAL MEHMET,ÖZKOÇ GÜRALP
Reverse Engineering Methods: “A Focus to the Compositional Analysis of Rubbers in Automotive” - ERCAN KALKAN MERVE,KARAKAYA NURSEL,KODAL MEHMET,ÖZKOÇ GÜRALP
Investigation of Mechanical, Dynamic Mechanical and Morphological Properties of NR/BR/POSS Vulcanizates - ERCAN KALKAN MERVE,KARAKAYA NURSEL,KODAL MEHMET,ÖZKOÇ GÜRALP
Surface Modified Carbon Nanofillers in Poly(Butylene Succinate): “Dispersion versus Crystallization Kinetics” - YARICI TUGAY,KODAL MEHMET,ÖZKOÇ GÜRALP
A comparison of new generation lab-scale twin-screw micro-compounders with conventional rubber compounding devices - YAZICI NAZLI,TABAK CEREN,KODAL MEHMET,ÖZKOÇ GÜRALP
Mechanical, thermal, rheological and morphological properties of poly(lactic acid)/butanol-algae oil esters - KODAL MEHMET,KUTLUK TOGAYHAN,AYDOĞDU HİLAL,KAPUCU NURCAN,ÖZKOÇ GÜRALP
M-POSS as an adhesion promoter for aramid cord and natural rubber system - KODAL MEHMET,YAZICI NAZLI,DURSUN SAMET,YARICI TUGAY,KILIÇ BURAK,KARAAĞAÇ BAĞDAGÜL,ÖZKOÇ GÜRALP
The adhesion behaviour of overmolded PP based continuous glass fiber composite sheets and PP compounds - AKPINAR SERKAN,ARKIN E,YILDIRIM A,KODAL MEHMET,ÖZKOÇ GÜRALP
Investigation of mechanical, thermal and rheological properties of crosslinked LDPE, LLDPE-C6 and LLDPE-C8 blends containing polybutadiene as a coagent - BAŞARAN ESRA,BİÇER EZGİ,KURT DEMİR GÜLŞEN,KODAL MEHMET,ÖZKOÇ GÜRALP
The investigation of the effect of TAIC loading level on the properties of LLDPE/PRX - GÜLER FATMA,BİÇER EZGİ,KURT DEMİR GÜLŞEN,KODAL MEHMET,ÖZKOÇ GÜRALP
Development of a TPO recycled from exterior painted trim components in automotive - AKPINAR SERKAN,METİN MERVE,KIVANÇ S,CAN T,ARKIN EÇ,YILDIRIM A,KODAL MEHMET,ÖZKOÇ GÜRALP
Polyhedral oligomeric silsesquioxanes (POSS) as a potential compatibilizers: “PLA/PBAT blends” - KILIÇ TÜCCAR NİLAY,KODAL MEHMET,ÖZKOÇ GÜRALP
Possible replacement of RFL with environmentally-friendly alternatives: Investigation of M-POSS on the adhesion properties between Nylon cord and natural rubber system - YAZICI NAZLI,DURSUN SAMET,YARICI TUGAY,KILIÇ BURAK,KODAL MEHMET,ÖZKOÇ GÜRALP,KARAAĞAÇ BAĞDAGÜL
The effect of POSS on the adhesion between polyester cord and natural rubber - YAZICI NAZLI,DURSUN SAMET,YARICI TUGAY,KILIÇ BURAK,KARAAĞAÇ BAĞDAGÜL,KODAL MEHMET,ÖZKOÇ GÜRALP
OM-POSS as an adhesion promoter for Rayon cord/natural rubber system, , Poster sunum, Hannover, Almanya, 6-8 Kasım 2018. - YAZICI NAZLI,DURSUN SAMET,YARICI TUGAY,KILIÇ BURAK,ÖZKOÇ GÜRALP,KODAL MEHMET,KARAAĞAÇ BAĞDAGÜL
Possible replacement of RFL with environmentally-friendly alternatives: Investigation of M-POSS on the adhesion properties between nylon cord and natural rubber system - YAZICI NAZLI,DURSUN SAMET,YARICI TUGAY,KILIÇ BURAK,KODAL MEHMET,ÖZKOÇ GÜRALP,KARAAĞAÇ BAĞDAGÜL
OM-POSS as an adhesion promoter for Rayon cord/natural rubber system - YAZICI NAZLI,DURSUN SAMET,YARICI TUGAY,KILIÇ BURAK,ÖZKOÇ GÜRALP,KODAL MEHMET,KARAAĞAÇ BAĞDAGÜL
Effects of POSSs on the adhesion between silicone rubber and reinforcing fabric cords: “Comparison of POSS and resorcinol formaldehyde latex (RFL) - ŞİRİN HÜMEYRA,KODAL MEHMET,KARAAĞAÇ BAĞDAGÜL,ÖZKOÇ GÜRALP
The effect of POSS on the adhesion between polyester cord and natural rubber - YAZICI NAZLI,DURSUN SAMET,YARICI TUGAY,KILIÇ BURAK,KARAAĞAÇ BAĞDAGÜL,KODAL MEHMET,ÖZKOÇ GÜRALP
Mechanical, rheological and morphological properties of NR/M-POSS compounds - YAZICI NAZLI,DURSUN SAMET,YARICI TUGAY,KILIÇ BURAK,KODAL MEHMET,ÖZKOÇ GÜRALP,KARAAĞAÇ BAĞDAGÜL
Mechanical and rheological properties of nr/poss compounds: Comparison of OV-POSS and OM-POSS - DURSUN SAMET,YAZICI NAZLI,KILIÇ BURAK,YARICI TUGAY,KARAAĞAÇ BAĞDAGÜL,KODAL MEHMET,ÖZKOÇ GÜRALP
M-POSS as an adhesion promoter for aramid cord and natural rubber system - YAZICI NAZLI,DURSUN SAMET,YARICI TUGAY,KILIÇ BURAK,KARAAĞAÇ BAĞDAGÜL,KODAL MEHMET,ÖZKOÇ GÜRALP
OM-POSS as an adhesion promoter for aramid cord/natural rubber system - YAZICI NAZLI,DURSUN SAMET,YARICI TUGAY,KILIÇ BURAK,ÖZKOÇ GÜRALP,KODAL MEHMET,KARAAĞAÇ BAĞDAGÜL
Evaluating the octavinyl polyhedral oligomeric silsesquioxane as an adhesion promoter for polymeric textile cords and tire-rubber matrix - KARAAĞAÇ BAĞDAGÜL,DURSUN SAMET,YAZICI NAZLI,KILIÇ BURAK,YARICI TUGAY,ÖZKOÇ GÜRALP,KODAL MEHMET
Investigation of crosslinking kinetics of silicone rubber/POSS nanocomposites - KARAAĞAÇ İLHAN,ÖZKOÇ GÜRALP,KARAAĞAÇ BAĞDAGÜL
Alg Yağı İle Plastikleştirilmiş PLA’nın Mekanik, Isıl Ve Morfolojik Özelliklerinin İncelenmesi - AYDOĞDU HİLAL,KODAL MEHMET,KUTLUK TOGAYHAN,KAPUCU NURCAN,ÖZKOÇ GÜRALP
Enzymatic Synthesis Of Microalgal Fatty Acid Esters As A Potential Plasticizing Agent For Poly (Lactic Acid) (PLA) Applications - KUTLUK TOGAYHAN,KODAL MEHMET,KAPUCU NURCAN,ÖZKOÇ GÜRALP
Oktadekanol ile modifiye edilmiş karbon nanotüp/poli(bütilen süksinat) nanokompozitlerin izotermal olmayan kristalizasyon kinetiğinin incelenmesi - YARICI TUGAY,KODAL MEHMET,ÖZKOÇ GÜRALP
Geri kazanılmış kısa cam elyaf/geri kazanılmış poliamit kompozitlerinin üretimi ve karakterizasyonu - BİÇER EZGİ,KODAL MEHMET,ÖZKOÇ GÜRALP
Peroksit ile çapraz bağlanmış polietilen: ”peroksit konsantrasyonunun fiziksel ve reolojik özellikler üzerindeki etkisi - BİÇER EZGİ,KURT DEMİR GÜLŞEN,KODAL MEHMET,ÖZKOÇ GÜRALP
Yüzeyi modifiye edilmiş karbon nanotüpün poli(bütilen süksinat)’ın izotermal olmayan kristalizasyon kinetiğine etkisinin incelenmesi - YARICI TUGAY,KODAL MEHMET,ÖZKOÇ GÜRALP
Çapraz bağlanmış LDPE/POSS nanokompozitlerinin fiziksel ve şekil hafıza özelliklerinin incelenmesi - KURT DEMİR GÜLŞEN,BİÇER EZGİ,KODAL MEHMET,ÖZKOÇ GÜRALP
Octaisobutyl-POSS as a potential compatibilizer for PLA/PBAT blends - KILIÇ TÜCCAR NİLAY,CAN BUSE NUR,KODAL MEHMET,ÖZKOÇ GÜRALP
Comparison of the effects of O-POSS in the immiscible PLA/PBAT blends and partially miscible PLA/TPU blends - CAN BUSE NUR,KILIÇ TÜCCAR NİLAY,KODAL MEHMET,ÖZKOÇ GÜRALP
Morphological, mechanical, rheological properties of PLA/TPU/Epoxy-POSS blends: “effects of TPU content” - KILIÇ TÜCCAR NİLAY,CAN BUSE NUR,KODAL MEHMET,ÖZKOÇ GÜRALP
The use of an epoxidized compatibilizer in the blends of PLA/PBAT: “effects of PBAT molecular weight” - CAN BUSE NUR,KILIÇ TÜCCAR NİLAY,KODAL MEHMET,ÖZKOÇ GÜRALP
Effects of Epoxy-POSS Nanoparticles on the Compatibility of PLA/PBAT Blends - KILIÇ TÜCCAR NİLAY,CAN BUSE NUR,KODAL MEHMET,ÖZKOÇ GÜRALP
The Usage of Octaisobutyl-POSS in the Blends of PLA/PBAT: “Effects of Molecular Weight of PBAT” - CAN BUSE NUR,KILIÇ TÜCCAR NİLAY,KODAL MEHMET,ÖZKOÇ GÜRALP
Effects of different toughens on the properties of poly(lactic acid) - CAN BUSE NUR,KILIÇ TÜCCAR NİLAY,KODAL MEHMET,ÖZKOÇ GÜRALP
Thermal and Thermo-mechanical Properties of PLA/TPU/Epoxy-POSS Ternary Blends - KILIÇ TÜCCAR NİLAY,CAN BUSE NUR,KODAL MEHMET,ÖZKOÇ GÜRALP
Immiscible PLA/PBAT blends and Partially Miscible PLA/TPU blends: “Comparison of the Effects of O-POSS on Thermal and Thermo-mechanical Properties” - KILIÇ TÜCCAR NİLAY,CAN BUSE NUR,KODAL MEHMET,ÖZKOÇ GÜRALP
Peroxide Crosslinking of Lineer Low Density Polyethylene - KURT DEMİR GÜLŞEN,BİÇER EZGİ,KODAL MEHMET,ÖZKOÇ GÜRALP
Properties of Crosslinked Polyethylene/Oib-POSS Nanocomposites: ”Effect of peroxide concentration”, - BİÇER EZGİ,KURT DEMİR GÜLŞEN,KODAL MEHMET,ÖZKOÇ GÜRALP
The Effects of Surface Modification of MWCNTs with Hexanol on the Non-isothermal Crystallization Kinetics of Poly(butylene succinate) - YARICI TUGAY,KODAL MEHMET,ÖZKOÇ GÜRALP
Compatibilization of PLA/PBAT blends with Epoxy-POSS nanoparticles: “Effects of PBAT molecular weight” - KILIÇ TÜCCAR NİLAY,CAN BUSE NUR,KODAL MEHMET,ÖZKOÇ GÜRALP
Investigation of PBAT ratio effects on the mechanical, morphological and rheological properties of the PLA/PBAT/epoxy-POSS ternary blends - KILIÇ TÜCCAR NİLAY,CAN BUSE NUR,KODAL MEHMET,ÖZKOÇ GÜRALP
The Effects of Surface Modification of Graphene with Hexanol on the Non-isothermal Crystallization Kinetics of Poly(butylene succinate) - KODAL MEHMET,YARICI TUGAY,ÖZKOÇ GÜRALP
Evaluating the octavinyl polyhedral oligomeric silsesquioxane as an adhesion promoter for polymeric textile cords and tire-rubber matrix - KARAAĞAÇ BAĞDAGÜL,DURSUN SAMET,YAZICI NAZLI,KILIÇ BURAK,YARICI TUGAY,ÖZKOÇ GÜRALP,KODAL MEHMET
TPM ve Kaizen - KOCA KAYHAN,KODAL MEHMET,ÖZKOÇ GÜRALP
PLA/PBAT/octaisobutyl-POSS ternary blends: effects of octaisobutyl-POSS loading ratio on the morphological, mechanical and rheological properties - KILIÇ TÜCCAR NİLAY,CAN BUSE NUR,KODAL MEHMET,ÖZKOÇ GÜRALP
Effects of green microalgae on the non-isothermal crystallization kinetics of poly(lactic acid) (PLA) - KODAL MEHMET,KUTLUK TOGAYHAN,ÖZKOÇ GÜRALP
Etilen glikol dimetakrilat ile hazırlanan çapraz bağlanmış polietilenin mekanik, ısıl ve reolojik özelliklerinin incelenmesi - BAŞARAN ESRA,BİÇER EZGİ,KURT DEMİR GÜLŞEN,KODAL MEHMET,ÖZKOÇ GÜRALP
Study on mechanical/thermal properties and fracture behavior of PLA toughened with PBAT and POSS - YILMAZ SİNAN,KODAL MEHMET,KILIÇ TÜCCAR NİLAY,ÖZKOÇ GÜRALP
Shape memory properties and characterization of crosslinked polyethylene/Oib-POSS composites - KODAL MEHMET,BİÇER EZGİ,KURT DEMİR GÜLŞEN,ÖZKOÇ GÜRALP
Properties of crosslinked LLDPE in the presence of TMPTMA or POSS nanoparticles: ”Comparison of physical properties and shape memory behaviour - KURT DEMİR GÜLŞEN,BİÇER EZGİ,KODAL MEHMET,ÖZKOÇ GÜRALP
Comparison of TAIC or OvPOSS on the crosslinking efficiency and shape memory properties of LDPE - BİÇER EZGİ,KURT DEMİR GÜLŞEN,KODAL MEHMET,ÖZKOÇ GÜRALP
OM-POSS as an adhesion promoter for aramid cord/natural rubber system - YAZICI NAZLI,DURSUN SAMET,YARICI TUGAY,KILIÇ BURAK,ÖZKOÇ GÜRALP,KODAL MEHMET,KARAAĞAÇ BAĞDAGÜL
The comparison of triglycidyl isobutyl-POSS and 1,4-phenylene diisocyanate as compatibilizers in PLA/TPU blends - KILIÇ TÜCCAR NİLAY,CAN BUSE NUR,KODAL MEHMET,ÖZKOÇ GÜRALP
Mechanical and rheological properties of NR/POSS compounds: “Comparison of OV-POSS and OM-POSS” - DURSUN SAMET,YAZICI NAZLI,KILIÇ BURAK,YARICI TUGAY,KARAAĞAÇ BAĞDAGÜL,KODAL MEHMET,ÖZKOÇ GÜRALP
Micro-compounders utilized in laboratory scale rubber formulation development - KODAL MEHMET,Quadflieg Martin,ÖZKOÇ GÜRALP
Effects of POSSs on the adhesion between silicone rubber and reinforcing fabric cords: “comparison of POSS and resorcinol formaldehyde latex (RFL)” - ŞİRİN HÜMEYRA,KODAL MEHMET,KARAAĞAÇ BAĞDAGÜL,ÖZKOÇ GÜRALP
Mechanical, rheological and morphological properties of NR/M-POSS compounds - YAZICI NAZLI,DURSUN SAMET,YARICI TUGAY,KILIÇ BURAK,KODAL MEHMET,ÖZKOÇ GÜRALP,KARAAĞAÇ BAĞDAGÜL
Enzymatic synthesis of microalgal fatty acid esters as a potential plasticizing agent for poly(lactic acid) (PLA) applications - KUTLUK TOGAYHAN,KODAL MEHMET,KAPUCU NURCAN,ÖZKOÇ GÜRALP
PEG-POSS ile plastikleştirilmiş melamin-formaldehit reçinelerin mekanik, ısıl ve reolojik özelliklerinin incelenmesi - ÇELİK KÜBRA,KODAL MEHMET,ÖZKOÇ GÜRALP
Alg yağı ile plastikleştirilmiş PLA’nın mekanik, ısıl ve morfolojik özelliklerinin incelenmesi - AYDOĞDU HİLAL,KODAL MEHMET,KUTLUK TOGAYHAN,KAPUCU NURCAN,ÖZKOÇ GÜRALP
Peroksit ile çapraz bağlanmış LDPE/POSS: “Peroksit konsantrasyonu ve POSS türünün fiziksel ve şekil hafıza özelliklerine etkisi” - KURT DEMİR GÜLŞEN,BİÇER EZGİ,KODAL MEHMET,ÖZKOÇ GÜRALP
Farklı oranlarda TMPTMA ile çapraz bağlanmış LLDPE karışımlarının özelliklerinin incelenmesi - GÜLER FATMA,BİÇER EZGİ,KURT DEMİR GÜLŞEN,KODAL MEHMET,ÖZKOÇ GÜRALP
Peroksit ile çapraz bağlanmış LLDPE/POSS kompozitlerinde termal, mekanik ve reolojik özellikler ile şekil hafıza davranışının incelenmesi - BİÇER EZGİ,KURT DEMİR GÜLŞEN,KODAL MEHMET,ÖZKOÇ GÜRALP
Mekanik ve Darbe Mukavemetleri Atık MAlzemeler ile Geliştirilmiş Yüksek Katma Degerli PLA Bazlı ÇEvre Dostu Kompozit Üretimi - Oguz Oguzhan,Bilge Kaan,ŞİMŞEK EREN,Çıtak Mehmet,ELCHEKWIS ABDULMOUNEM,ÖZKOÇ GÜRALP,MENCELOĞLU YUSUF ZİYA
Oktadekanol ile modifiye edilmiş karbon nanotüp/poli(bütilen süksinat) nanokompozitlerinin izotermal olmayan kristalizasyon kinetiğinin incelenmesi - TUGAY YARICI,KODAL MEHMET,ÖZKOÇ GÜRALP
Geri kazanılmış kısa cam elyaf/geri kazanılmış poliamit kompozitlerinin üretimi ve karakterizasyonu - BİÇER EZGİ,KODAL MEHMET,ÖZKOÇ GÜRALP
Peroksit ile çapraz bağlanmış polietilen: ”peroksit konsantrasyonunun fiziksel ve reolojik özellikler üzerindeki etkisi - BİÇER EZGİ,GÜLŞEN KURT DEMİR,KODAL MEHMET,ÖZKOÇ GÜRALP
Performance of Jute/PLA All-Biodegredable Overmolded Ecocomposites - ELCHEKWIS ABDULMOUNEM,ÖZKOÇ GÜRALP
Shape Memory Crosslinked Polyethylene/POSS Nanocomposites: “Effect of different POSS types” - BİÇER EZGİ,KURT DEMİR GÜLŞEN,KODAL MEHMET,ÖZKOÇ GÜRALP
Peroxide Crosslinking of Lineer Low Density Polyethylene - KURT DEMİR GÜLŞEN,BİÇER EZGİ,KODAL MEHMET,ÖZKOÇ GÜRALP
Properties of Crosslinked Polyethylene/Oib-POSS Nanocomposites:Effect of peroxide concentration - BİÇER EZGİ,KURT DEMİR GÜLŞEN,KODAL MEHMET,ÖZKOÇ GÜRALP
Effect of co-plasticizer type on properties of edible starch films - ÖZKOÇ SEMİN ÖZGE,Sungur Seval,Kaval Melike,ÖZKOÇ GÜRALP
The Effects of Surface Modification of MWCNTs with Hexanol on the Non-isothermal Crystallization Kinetics of Poly(butylene succinate) - TUGAY YARICI,KODAL MEHMET,ÖZKOÇ GÜRALP
Octaisobutyl-POSS as a potential compatibilizer for PLA/PBAT blends - KILI TÜCCAR NİLAY,CAN BUSE NUR,KODAL MEHMET,ÖZKOÇ GÜRALP
Comparison of the effects of O-POS in the immiscible PLA/PBAT blends and partially miscible PLA/TPU blends - CAN BUSE NUR,KILI TÜCCAR NİLAY,KODAL MEHMET,ÖZKOÇ GÜRALP
Morphological, mechanical, rheological properties of PLA/TPU/Epoxy-POSS blends: “effects of TPU content” - KILI TÜCCAR NİLAY,CAN BUSE NUR,KODAL MEHMET,ÖZKOÇ GÜRALP
The use of an epoxidized compatibilizer in the blends of PLA/PBAT: “effects of PBAT molecular weight” - CAN BUSE NUR,KILI TÜCCAR NİLAY,KODAL MEHMET,ÖZKOÇ GÜRALP
Effects of Epoxy-POSS Nanoparticles on the Compatibility of PLA/PBAT Blends - KILI TÜCCAR NİLAY,CAN BUSE NUR,KODAL MEHMET,ÖZKOÇ GÜRALP
The Usage of Octaisobutyl-POSS in the Blends of PLA/PBAT: “Effects of Molecular Weight of PBAT” - CAN BUSE NUR,KILI TÜCCAR NİLAY,KODAL MEHMET,ÖZKOÇ GÜRALP
Effects of different tougheners on the properties of poly(lactic acid) - CAN BUSE NUR,KILI TÜCCAR NİLAY,KODAL MEHMET,ÖZKOÇ GÜRALP
Thermal and Thermo-mechanical Properties of PLA/TPU/Epoxy-POSS Ternary Blends - KILI TÜCCAR NİLAY,CAN BUSE NUR,KODAL MEHMET,ÖZKOÇ GÜRALP
Immiscible PLA/PBAT blends and Partially Miscible PLA/TPU blends: “Comparison of the Effects of O-POSS on Thermal and Themo-mechanical Properties” - KILI TÜCCAR NİLAY,CAN BUSE NUR,KODAL MEHMET,ÖZKOÇ GÜRALP
Peroxide Crosslinking of Lineer Low Density Polyethylene - GÜLŞEN KURT DEMİR,BİÇER EZGİ,KODAL MEHMET,ÖZKOÇ GÜRALP
Properties of Crosslinked Polyethylene/Oib-POSS Nanocomposites: ”Effect of peroxide concentration”, - BİÇER EZGİ,GÜLŞEN KURT DEMİR,KODAL MEHMET,ÖZKOÇ GÜRALP
Investigation of PBAT ratio effects on the mechanical, morphological and rheological properties of the PLA/PBAT/epoxy-POSS ternary blends - KILI TÜCCAR NİLAY,CAN BUSE NUR,KODAL MEHMET,ÖZKOÇ GÜRALP
The Effects of Surface Modification of Graphene with Hexanol on the Non-isothermal Crystallization Kinetics of Poly(butylene succinate) - KODAL MEHMET,TUGAY YARICI,ÖZKOÇ GÜRALP
Evaluating the octavinyl polyhedral oligomeric silsesquioxane as an adhesion promoter for polymeric textile cords and tire-rubber matrix - KARAAĞAÇ BAĞDAGÜL,DURSUN SAMET,YAZICI NAZLI,KILIÇ BURAK,TUGAY YARICI,KODAL MEHMET,ÖZKOÇ GÜRALP
TPM ve Kaizen - KOCA KAYHAN,KODAL MEHMET,ÖZKOÇ GÜRALP
PLA/PBAT/octaisobutyl-POSS ternary blends: effects of octaisobutyl-POSS loading ratio on the morphological, mechanical and rheological properties - KILI TÜCCAR NİLAY,CAN BUSE NUR,KODAL MEHMET,ÖZKOÇ GÜRALP
Effects of green microalgae on the non-isothermal crystallization kinetics of poly(lactic acid) (PLA) - KODAL MEHMET,KUTLUK TOGAYHAN,ÖZKOÇ GÜRALP
Shape memory crosslinked polyethylene/POSS nanocomposites: ”Effects of POSS types” - BİÇER EZGİ,GÜLŞEN KURT DEMİR,KODAL MEHMET,ÖZKOÇ GÜRALP
The influence of volcanic particles on mecchanical properties of PLA PBAT Blends - ÇOBAN ONUR,BORA MUSTAFA ÖZGÜR,KUTLUK TOGAYHAN,ÖZKOÇ GÜRALP
A study on thermal properties of volcanic particle filled PLA PBAT composites - KUTLUK TOGAYHAN,ÇOBAN ONUR,BORA MUSTAFA ÖZGÜR,ÖZKOÇ GÜRALP
Improving mechanical and thermal properties of PLA by using POSS cored star shaped PCL polymers - Doğancı Merve Dandan,Aynalı Funda,DOĞANCI ERDİNÇ,Yılmaz Faruk,ÖZKOÇ GÜRALP
The effects of gamma irradiation on the mechanical and thermal properties of PLA - KODAL MEHMET,Elchekwis Abdulmounem,ÖZKOÇ GÜRALP
Investigation of the correlation between adhesion strength and thermodynamic work of adhesion on silicone rubber kevlar rayon fibers - Şirin Hümeyra,KODAL MEHMET,KARAAĞAÇ BAĞDAGÜL,ÖZKOÇ GÜRALP
Non isothermal crystallization kinetics of carbonaceous nanofiller renforced PBS nanocomposites - Filizgök Selen,KODAL MEHMET,ÖZKOÇ GÜRALP
Relationship between crystallization kinetics and interfacial interactions in PLA POSS nanocomposites - KODAL MEHMET,Şirin Hümeyra,ÖZKOÇ GÜRALP
Corn bran Alternative cellulosic fiber for PP - Can Buse Nur,Kuman Aylin,Gözütok Cansu,ÖZKOÇ GÜRALP
PBAT Thermoplastic Starch Blends Effects of oxidized starch and compatibilizer content - Can Buse Nur,ÖZKOÇ GÜRALP
Effects of epoxy POSS nanoparticles on the properties of PLA TPU Blends - Kılıç Nilay Tüccar,Can Buse Nur,KODAL MEHMET,ÖZKOÇ GÜRALP
Synthesis and properties of POSS modified PS Microbeads - Kılıç Nilay Tüccar,Turgut Gizem,Boyacıoglu Seyhan,Yogurtcu Ozge,KODAL MEHMET,ÖZKOÇ GÜRALP
USE OF COMPATIBILIZER FOR POLY LACTIC ACID HALLOYSITE NANOCOMPOSITES - Canan Yeniova,ÖZKOÇ GÜRALP,YILMAZER ÜLKÜ
A Comparison of PET Clay and PET POSS Nanocomposite Fibers - Şirin Hümeyra,Turan Dilek,Sezen Gürdağ,ÖZKOÇ GÜRALP
Correlation Between Crystallization Rate and Interfacial Interactions in Plasticized PLA POSS Nanocomposites - KODAL MEHMET,Şirin Hümeyra,ÖZKOÇ GÜRALP
Adhesion between Reinforcing Fibers and Silicone Rubber POSS Composites - Hümeyra Şirin,KODAL MEHMET,KARAAĞAÇ BAĞDAGÜL,ÖZKOÇ GÜRALP
The exfoliated structure of crosslinked PDMS nanocomposites - UYANIK NURSELİ,Yağmur Çavuşoğlu,ÖZKOÇ GÜRALP
EFFECTS OF HYDROXYL POSS ON THE NON ISOTHERMAL CRYSTALLIZATION KINETICS OF PLASTICIZED PLA - KODAL MEHMET,Hümeyra Şirin,ÖZKOÇ GÜRALP
THE EFFECTS OF NANOPARTICLE SHAPE ON THE CRYSTALLIZATION KINETICS OFPOLY BUTYLENE SUCCINATE BASED NANOCOMPOSITES - Selen Filizgök,KODAL MEHMET,ÖZKOÇ GÜRALP
PRODUCTION OF NANOCOMPOSITE POLYSTYRENE POSS MICRO BEADS - Seyhan Boyacıoğlus,Gizem Turgut,Yıldırım Aysun,Özge Yoğurtçu,Nilay Tüccar,KODAL MEHMET,ÖZKOÇ GÜRALP
SELF ATTENUATION OF GAMMA RAYS BY HDPE hBN COMPOSITES ESTIMATION OF PARTICLE SIZE EFFECT - BAYKARA OKTAY,El Chekwis Abdulmounem,İrim Gözde,ÖZKOÇ GÜRALP,Öztürk Fatih Kulu,AVCI AHMET
DEVELOPMENT OF SILICONE RUBBER POSS NANOCOMPOSITE FORMULATION TO IMPROVE INTERFACIAL ADHESION BETWEEN KEVLAR AND SILICONE - Hümeyra Şirin,KODAL MEHMET,KARAAĞAÇ BAĞDAGÜL,ÖZKOÇ GÜRALP
COMPARATIVE INVESTIGATION ON THE CHEMICAL PROPERTIES OF COMPOSITE BASED DIRECT INDIRECT AND CAD CAM RESTORATIVES CURED VIA DIFFERENT POLYMERIZATION TECHNIQUES A PRELIMINARY STUDY - PAMİR TİJEN,ERCAN ELİF,ÖZKOÇ GÜRALP
The use of compatibilizer in poly lactic acid halloysit nancomposites - Canan Erpek,ÖZKOÇ GÜRALP,YILMAZER ÜLKÜ
MECHANICAL THERMAL AND RAY SHIELDING PROPERTIES OF HDPE BN Gd2O3 TERNARY NAOCOMPOSITES EFFECTS OF PARTICLE CONCENTRATION - BAYKARA OKTAY,El Chekwis Abdulmounem,İrim Gözde,ÖZKOÇ GÜRALP,Öztürk Fatih Kulu,AVCI AHMET
Books
Polyhedral Oligomeric Silsesquioxane (POSS) Polymer Nanocomposites: From Synthesis and Applicaitons – ELSEVIER
Poly(vinyl Chloride) Based Composites and Nanocomposites – SPRINGER
Mikroplastiklerden Nanoplastiklere Plastik Kirleticiler – NOBEL
Carbon Based Nanofiilers and Their Rubber Nanocomposites – Elsevier
Advances in elastomers I ans II: Blends and interpenetrating networks – Springer
Constitutive Models for Rubbers X – Taylor and Francis Group
Polymer Surface Modification Relevance to adhesion – VSP
Plastikler – ODTÜ
Awards
Prof. Dr. Baki Komsuoğlu Bilim Teşvik Ödülü – 2012
ARGE PROJE PAZARI EN İYİ PROJE BİRİNCİLİĞİ – 2013
ARGE PROJE PAZARI YARIŞMASI İKİNCİLİĞİ – 2013
Doruktakiler 2011 – 2011
2015 yılı akademik performans değerlendirmesi – 2014
